Microsoft 認証 [試験]
MCP、MCSE、MCSE2000、MCDBA、MCSE2003、MCSE2003 Security、MCSE2003 Messaging、Mcse2000 TO Mcse2003 Upgrade、MCSA、MCSA2003、MCSD.NET、MCAD.NET、MCDST、MCTS、MCITP、MCPD、Microsoft Partner Competency、Microsoft Licensing、Microsoft Business Solutions、MCSE2008これはMicrosoft 認証の区別です。
ご存知と思いますが、IT分野で、Microsoft認証育成訓練は非常に必要されています。ここ数年からMicrosoft認証を持っていることは、有名な会社に入れるかどうか重要な標準になります。
Microsoft訓練はとても人気があります。お客様はどんな国にいっても、Microsoft育成訓練学校とオンライン育成訓練資源が見つけやすいです。Microsoft専門家になるために、お客様はすべてMicrosoftのテストロジェクトを勉強しなければなりません、弊社のMicrosoft学習ガイドと先進的な育成訓練資源http://www.killtest.jpを使ってもっと便利にMicrosoft認証を取れます。
70-241の例：
1.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You develop three schemas all of which have a
property named AccountID. They're respectively named Account, AccountOrder, and AccountAnswer.
Now you create an orchestration which performs the following steps in sequence, the orchestration
contains one Send shape, two Receive shapes, and several other shapes. First, the orchestration
receives an incoming document, and the document matches the Account schema, second it maps the
incoming document to the AccountOrder schema, and then it sends the AccountOrder message to the
MessageBox database, receives messages that match the AccountAnswer schema back from the
MessageBox database. At last if the AccountAnswer message indicates any errors, it logs a message to
the event log. You develop a correlation set named CorrelationAccountID and a correlation type. Both of
them re on the basis of the AccountID property. Now you have been assigned a task that you must ensure
that multiple instances of the orchestration can run simultaneously, besides this, you must make sure that
each one can process a unique account ID. In order to assure this, what actions should you do? (choose
more than one)
A.On the Send shape, you should initialize CorrelationAccountID.
B.On the first Receive shape, you should initialize CorrelationAccountID.
C.On the second Receive shape, you should initialize CorrelationAccountID.
D.On the second Receive shape, you should set the Following Correlation property. Make it be equal to
CorrelationAccountID.
E.On the Send shape, you should set the Following Correlation property. Make it to be equal to
CorrelationAccountID.
Answer:A D
2.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You develop an orchestration which contains several
steps. You intend to use Business Activity Monitoring (BAM) to track the orchestration. You create a BAM
definition. The BAM definition has several activities. What should you do to modify the dimensions that
are associated with these activity components?
A.You should utilize the Tracking Profile Editor (TPE).
B.You should modify the Pivot Table Field List by using Microsoft Excel.
C.You should use the Business Activity Monitoring Activity Definition Wizard.
D.You should create a new rule in the policy by using the Business Rule Composer.
Answer:C
3.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. The PassThru receive pipeline is used by a receive
port. Inbound SOAP messages are not being validated against schemas. At the earliest stage in the
receive pipeline, what should you do to validate the messages against the envelope and body schemas?
A.First, you should configure the receive port and make it use the default XML receive pipeline. Second,
the EnvelopeSpecNames property of the pipeline should be set to the envelope schema.
B.First, you should create a custom receive pipeline. Add an XML validator in the Validate phase. Then
configure the receive port and make it use the custom receive pipeline. Before you perform this, the
Document schemas collection should be set to the envelope and body schemas.
C.First, you should create a custom receive pipeline and add an XML disassembler in the Disassemble
phase. And then configure the receive port and make it use the custom receive pipeline. Before you
perform this, you should set the envelope and body schemas and the Validate document structure
property should be set to True.
D.First, you should create a custom receive pipeline and add a flat file disassembler in the Disassemble
phase. And then configure the receive port and make it use the custom receive pipeline. Before you
perform this, the Validate document structure property should be set to True and you should set the
envelope and body schemas.
Answer:C
4.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You develop an orchestration which performs the
following: 1. Perform mapping 2. Process files from a receive port 3. Send a message to a business
partner. The orchestration is running and the receive port is enabled, but the associated send port is
unenlisted. A text file is dropped in the receive location. The message is not sent to your business partner
despite that the orchestration finishes successfully. So what should you do to make sure that your
business partner can receive the message?
A.First, you should disable all breakpoints by using Health and Activity Tracking (HAT). Second you
resubmit the file.
B.First, you should save the message to a file directory by using Health and Activity Tracking (HAT).
Second you resubmit the file.
C.First, you should start the send port by using the BizTalk administration console. Second, you resume
the suspended message.
D.First, you should resume the suspended message by using the BizTalk administration console. Second,
you enable the receive location and resubmit the file.
Answer:C
5.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. Now you're developing a solution. You use the
Business Rule Composer to create several rules. From BizTalk RFID you call the Business Rules Engine
(BRE). There?010043010054re test input XML instances that are stored in different files. Now you have
to use them to test the rules. So what should you do?
A.You should run the Rule Engine Deployment Wizard.
B.You should use the BTSTask.exe command-line utility.
C.In the Business Rule Composer, you should use the Policy Explorer.
D.In the RFID Manager,you should use the RuleEnginePolicyExecutor event handler.
E.In Health and Activity Tracking (HAT), you should use the Orchestration Debugger.
Answer:C
6.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You have two schemas respectively named
NewOrder1.xsd and NewOrder2.xsd. Both of them are related to order processing. Messages that adhere
to NewOrder1.xsd are created by an order processing system and are delivered using a File receive port.
Messages that adhere to NewOrder2.xsd are created by a financial system and are delivered using an
FTP receive port. Both schemas have a promoted property named OrderID. You implement a parallel
convoy by using an orchestration. A Parallel shape which contains two Receive shapes is created. You
connect the Receive shapes to the receive ports. You base the Receive shapes and the receive ports on
one of the two message types. Now you must make sure that when an identical value is present in the
OrderID element, the same orchestration instance will receive both the message types. So what should
you do to ensure this?
A.First, you should create a correlation type which is based on the OrderID property. And create a
correlation set which is based on the correlation type. Second, you set both Receive shapes to initialize
the correlation set and both Receive shapes Activate property to True.
B.First, you should create a correlation type which is based on the OrderID property and create a
correlation set which is based on the correlation type. Second, both Receive shapes should be set to
initialize the correlation set and both Receive shapes Activate property should be set to False.
C.First, you should create a correlation type which is based on the OrderID property and create two
correlation sets which are based on the single correlation type. Second, each Receive shape should be
set to initialize one of the correlation sets and both Receive shapes Activate property should be set to
True.
D.First, you should create a correlation type which is based on the OrderID property and create two
correlation sets which are based on the single correlation type. Second, each Receive shape should be
set to initialize one of the correlation sets and one Receive shapes Activate property should be set to True
and the other Receive shapes Activate property to False.
Answer:A
7.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. Now you're developing a solution. You have a receive
port. It listens for XML files on a file drop, and then the files are moved to the MessageBox database as
they arrive. You develop an orchestration which subscribes to all messages on the MessageBox database.
The messages have an ErrorReport.ErrorType property which is populated. Your partner sends you a file
which is not routed to the orchestration. The files meets an exception on the receive port. In order to make
messages that fail on the port will be routed to the orchestration, you have to configure the receive port.
So what should you do to achieve this?
A.For failed messages check box on the receive port, you should select the Enable routing by using the
BizTalk administration console.
B.If authentication fails check box on the receive port, you should select the Keep messages by using the
BizTalk administration consol.
C.You should create a correlation set which has the correlation type set to ErrorReport. ErrorType in the
orchestration. In the orchestration, set the first Receive shape to initialize this correlation set.
D.Before port processing check box and the Request message after port processing properties check box
on the receive port, you should select the Request message By using the BizTalk administration console.
Answer:A
8.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You create a solicit-response HTTP port. Documents
meet errors in the incoming pipeline. An error status code of 500 is returned and the incoming message is
deleted. You must make sure that when incoming messages meet errors during pipeline processing, an
error status code of 202 is returned. Besides this, you must make sure that the incoming messages arrive
on the MessageBox database. So what should you do to achieve this?
A.On the HTTP receive location, you should select the Suspend failed requests check box.
B.If authentication fails option on the HTTP receive port properties, you should enable the Keep
messages.
C.You should enable the Enable routing for failed messages option on the HTTP receive port properties.
D.On the HTTP receive location, you should select the Loopback check box. On the HTTP receive port
properties, enable all inbound tracking options.
Answer:A
9.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You store all client information in a single table by
using Microsoft SQL Server 2005. The structure of the table never changes. But in the database, the
security policy forbids new stored procedures to be created. The use of dynamic SQL is not allowed either.
So what should you do to insert a new client record in the table?
A.You should send updategrams by using the SQL adapter.
B.You should call the sp_executeSQL stored procedure by using the SQL adapter.
C.You should configure the SQL adapters ConnectionString property and make the usage of Trusted
Security included.
D.You should configure the SQL adapters ConnectionString property and make the usage of Security
Support Provider Interface (SSPI) included.
Answer:A
10.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You are creating an orchestration. This orchestration
will consume services from a send port. And the SOAP adapter is used by the send port. Sometimes the
Web service URL for the send port will change. You have to provide support for the changing Web service
URL while not redeploying. First you add a new Web reference to the project by using Microsoft Visual
Studio .NET 2005. The project uses the URL of the SOAP services. So what's your next action?
A.First, you should create a new send port. The send port uses the Specify Later binding. Second, on this
new send port, you set the Port Type property to the new Web port type. Third, when the URL changes,
you set the URL by using Visual Studio.
B.First, you should create a new send port. The send port uses the Specify Later binding. Second, on this
new send port, you set the Port Type property to the new Web port type. Third, when the URL changes,
you set the URL by using the BizTalk administration console.
C.You should create a new send port that uses the Specify Now binding. Set the URI and Transport
properties for the new send port. Create a new port type. Use the BizTalk administration console to set the
URL when it changes.
D.First, you should create a new send port. The port uses the Specify Now binding. Second, you set the
URI and Transport properties for the new send port and on this new send port, set the Port Type property
to the new Web port type. Third, when the URL changes, you set the URL by using Visual Studio.
Answer:B
ご存知と思いますが、IT分野で、Microsoft認証育成訓練は非常に必要されています。ここ数年からMicrosoft認証を持っていることは、有名な会社に入れるかどうか重要な標準になります。
Microsoft訓練はとても人気があります。お客様はどんな国にいっても、Microsoft育成訓練学校とオンライン育成訓練資源が見つけやすいです。Microsoft専門家になるために、お客様はすべてMicrosoftのテストロジェクトを勉強しなければなりません、弊社のMicrosoft学習ガイドと先進的な育成訓練資源http://www.killtest.jpを使ってもっと便利にMicrosoft認証を取れます。
70-241の例：
1.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You develop three schemas all of which have a
property named AccountID. They're respectively named Account, AccountOrder, and AccountAnswer.
Now you create an orchestration which performs the following steps in sequence, the orchestration
contains one Send shape, two Receive shapes, and several other shapes. First, the orchestration
receives an incoming document, and the document matches the Account schema, second it maps the
incoming document to the AccountOrder schema, and then it sends the AccountOrder message to the
MessageBox database, receives messages that match the AccountAnswer schema back from the
MessageBox database. At last if the AccountAnswer message indicates any errors, it logs a message to
the event log. You develop a correlation set named CorrelationAccountID and a correlation type. Both of
them re on the basis of the AccountID property. Now you have been assigned a task that you must ensure
that multiple instances of the orchestration can run simultaneously, besides this, you must make sure that
each one can process a unique account ID. In order to assure this, what actions should you do? (choose
more than one)
A.On the Send shape, you should initialize CorrelationAccountID.
B.On the first Receive shape, you should initialize CorrelationAccountID.
C.On the second Receive shape, you should initialize CorrelationAccountID.
D.On the second Receive shape, you should set the Following Correlation property. Make it be equal to
CorrelationAccountID.
E.On the Send shape, you should set the Following Correlation property. Make it to be equal to
CorrelationAccountID.
Answer:A D
2.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You develop an orchestration which contains several
steps. You intend to use Business Activity Monitoring (BAM) to track the orchestration. You create a BAM
definition. The BAM definition has several activities. What should you do to modify the dimensions that
are associated with these activity components?
A.You should utilize the Tracking Profile Editor (TPE).
B.You should modify the Pivot Table Field List by using Microsoft Excel.
C.You should use the Business Activity Monitoring Activity Definition Wizard.
D.You should create a new rule in the policy by using the Business Rule Composer.
Answer:C
3.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. The PassThru receive pipeline is used by a receive
port. Inbound SOAP messages are not being validated against schemas. At the earliest stage in the
receive pipeline, what should you do to validate the messages against the envelope and body schemas?
A.First, you should configure the receive port and make it use the default XML receive pipeline. Second,
the EnvelopeSpecNames property of the pipeline should be set to the envelope schema.
B.First, you should create a custom receive pipeline. Add an XML validator in the Validate phase. Then
configure the receive port and make it use the custom receive pipeline. Before you perform this, the
Document schemas collection should be set to the envelope and body schemas.
C.First, you should create a custom receive pipeline and add an XML disassembler in the Disassemble
phase. And then configure the receive port and make it use the custom receive pipeline. Before you
perform this, you should set the envelope and body schemas and the Validate document structure
property should be set to True.
D.First, you should create a custom receive pipeline and add a flat file disassembler in the Disassemble
phase. And then configure the receive port and make it use the custom receive pipeline. Before you
perform this, the Validate document structure property should be set to True and you should set the
envelope and body schemas.
Answer:C
4.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You develop an orchestration which performs the
following: 1. Perform mapping 2. Process files from a receive port 3. Send a message to a business
partner. The orchestration is running and the receive port is enabled, but the associated send port is
unenlisted. A text file is dropped in the receive location. The message is not sent to your business partner
despite that the orchestration finishes successfully. So what should you do to make sure that your
business partner can receive the message?
A.First, you should disable all breakpoints by using Health and Activity Tracking (HAT). Second you
resubmit the file.
B.First, you should save the message to a file directory by using Health and Activity Tracking (HAT).
Second you resubmit the file.
C.First, you should start the send port by using the BizTalk administration console. Second, you resume
the suspended message.
D.First, you should resume the suspended message by using the BizTalk administration console. Second,
you enable the receive location and resubmit the file.
Answer:C
5.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. Now you're developing a solution. You use the
Business Rule Composer to create several rules. From BizTalk RFID you call the Business Rules Engine
(BRE). There?010043010054re test input XML instances that are stored in different files. Now you have
to use them to test the rules. So what should you do?
A.You should run the Rule Engine Deployment Wizard.
B.You should use the BTSTask.exe command-line utility.
C.In the Business Rule Composer, you should use the Policy Explorer.
D.In the RFID Manager,you should use the RuleEnginePolicyExecutor event handler.
E.In Health and Activity Tracking (HAT), you should use the Orchestration Debugger.
Answer:C
6.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You have two schemas respectively named
NewOrder1.xsd and NewOrder2.xsd. Both of them are related to order processing. Messages that adhere
to NewOrder1.xsd are created by an order processing system and are delivered using a File receive port.
Messages that adhere to NewOrder2.xsd are created by a financial system and are delivered using an
FTP receive port. Both schemas have a promoted property named OrderID. You implement a parallel
convoy by using an orchestration. A Parallel shape which contains two Receive shapes is created. You
connect the Receive shapes to the receive ports. You base the Receive shapes and the receive ports on
one of the two message types. Now you must make sure that when an identical value is present in the
OrderID element, the same orchestration instance will receive both the message types. So what should
you do to ensure this?
A.First, you should create a correlation type which is based on the OrderID property. And create a
correlation set which is based on the correlation type. Second, you set both Receive shapes to initialize
the correlation set and both Receive shapes Activate property to True.
B.First, you should create a correlation type which is based on the OrderID property and create a
correlation set which is based on the correlation type. Second, both Receive shapes should be set to
initialize the correlation set and both Receive shapes Activate property should be set to False.
C.First, you should create a correlation type which is based on the OrderID property and create two
correlation sets which are based on the single correlation type. Second, each Receive shape should be
set to initialize one of the correlation sets and both Receive shapes Activate property should be set to
True.
D.First, you should create a correlation type which is based on the OrderID property and create two
correlation sets which are based on the single correlation type. Second, each Receive shape should be
set to initialize one of the correlation sets and one Receive shapes Activate property should be set to True
and the other Receive shapes Activate property to False.
Answer:A
7.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. Now you're developing a solution. You have a receive
port. It listens for XML files on a file drop, and then the files are moved to the MessageBox database as
they arrive. You develop an orchestration which subscribes to all messages on the MessageBox database.
The messages have an ErrorReport.ErrorType property which is populated. Your partner sends you a file
which is not routed to the orchestration. The files meets an exception on the receive port. In order to make
messages that fail on the port will be routed to the orchestration, you have to configure the receive port.
So what should you do to achieve this?
A.For failed messages check box on the receive port, you should select the Enable routing by using the
BizTalk administration console.
B.If authentication fails check box on the receive port, you should select the Keep messages by using the
BizTalk administration consol.
C.You should create a correlation set which has the correlation type set to ErrorReport. ErrorType in the
orchestration. In the orchestration, set the first Receive shape to initialize this correlation set.
D.Before port processing check box and the Request message after port processing properties check box
on the receive port, you should select the Request message By using the BizTalk administration console.
Answer:A
8.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You create a solicit-response HTTP port. Documents
meet errors in the incoming pipeline. An error status code of 500 is returned and the incoming message is
deleted. You must make sure that when incoming messages meet errors during pipeline processing, an
error status code of 202 is returned. Besides this, you must make sure that the incoming messages arrive
on the MessageBox database. So what should you do to achieve this?
A.On the HTTP receive location, you should select the Suspend failed requests check box.
B.If authentication fails option on the HTTP receive port properties, you should enable the Keep
messages.
C.You should enable the Enable routing for failed messages option on the HTTP receive port properties.
D.On the HTTP receive location, you should select the Loopback check box. On the HTTP receive port
properties, enable all inbound tracking options.
Answer:A
9.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You store all client information in a single table by
using Microsoft SQL Server 2005. The structure of the table never changes. But in the database, the
security policy forbids new stored procedures to be created. The use of dynamic SQL is not allowed either.
So what should you do to insert a new client record in the table?
A.You should send updategrams by using the SQL adapter.
B.You should call the sp_executeSQL stored procedure by using the SQL adapter.
C.You should configure the SQL adapters ConnectionString property and make the usage of Trusted
Security included.
D.You should configure the SQL adapters ConnectionString property and make the usage of Security
Support Provider Interface (SSPI) included.
Answer:A
10.You work in an international company which is named TXTWIN. And you're in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You are creating an orchestration. This orchestration
will consume services from a send port. And the SOAP adapter is used by the send port. Sometimes the
Web service URL for the send port will change. You have to provide support for the changing Web service
URL while not redeploying. First you add a new Web reference to the project by using Microsoft Visual
Studio .NET 2005. The project uses the URL of the SOAP services. So what's your next action?
A.First, you should create a new send port. The send port uses the Specify Later binding. Second, on this
new send port, you set the Port Type property to the new Web port type. Third, when the URL changes,
you set the URL by using Visual Studio.
B.First, you should create a new send port. The send port uses the Specify Later binding. Second, on this
new send port, you set the Port Type property to the new Web port type. Third, when the URL changes,
you set the URL by using the BizTalk administration console.
C.You should create a new send port that uses the Specify Now binding. Set the URI and Transport
properties for the new send port. Create a new port type. Use the BizTalk administration console to set the
URL when it changes.
D.First, you should create a new send port. The port uses the Specify Now binding. Second, you set the
URI and Transport properties for the new send port and on this new send port, set the Port Type property
to the new Web port type. Third, when the URL changes, you set the URL by using Visual Studio.
Answer:B
コメント 0